Midwest Stamping & Metal Working Facility

Presses

Heller Sutherland 121 Ton Model Mark-121 Gap Frame Press, s/n HS-231 (New 1989), 7” Stroke, 13.7” Shut Height, 35-65 SPM, 26.7”x45.2”x6” Thick T-Slot Bolster, Air Clutch, Pedestal Palm Buttons

Aida 150 Ton Model PC-15 (2) Gap Frame Press, s/n 00115-0453, 7.8” Stroke, 45 SPM, 24.8”X48.8”X4.5” Thick T-Slot Bolster. Air Clutch, Air Cushion, Pedestal Palm Buttons

Custom A-Frame Hydraulic Press, 15”x18” Bolster

Ramco 30 Ton Model RP30 H-Frame Hydraulic Press, s/n L03257, 24” Between Housings

Hydraulic Tube Bender

Langbow Model TM32-2M Hydraulic Horizontal Tube Bender, Ref. No. 60783, 1.25” Capacity, Hydraulics in Base

Ironworker

Spartan 66 Ton Model IW66D Hydraulic Ironworker, s/n IW66D-219, 12” Throat, Assorted Accessories

Toolroom Lathes

Voest 21” x 56” Model RN1N2 Toolroom Lathe, s/n N/A, 12-1/2” Length of Gap, Approx. 26” Swing Thru Gap, 1,500 RPM Spindle, Inch/MM Threading, with 9” 3-Jaw Chuck, Fagor DRO

Okuma 22”x52” Model LS Toolroom Lathe, s/n 5975, 1,800 RPM Spindle, With 9” 3-Jaw Chuck

Vertical Mills

Warner 3HP Model 3VS Variable Speed Ram Type Vertical Mill, s/n N/A, 48” Power Table, DRO 

Bridgeport 1-1/2 HP Variable Speed Ram Type Vertical Mill, s/n 112BR133474, 42” Power Feed Table

Saws

Kysor Johnson 16” Model HA-16 Automatic Horizontal Band Saw, s/n 402440 

Kalamazoo 9”x18” Model H9AW Horizontal Band Saw, s/n K22206

Powermatic 20” Model 87 Vertical Band Saw, s/n 2-3082, with Blade Welder

Kalamazoo Model FHC-350P Cold Cut-Off, s/n KC502090L with 15’ Roller Table

Grinders

Elb 12”x20”” Model SW5VAl Hydraulic Surface Grinder, s/n 66590467 with Electro Magnetic Chuck

SMTW Model M1332AX500 Hydraulic Cylindrical Grinder, S/N 8308, (Less Headstock & Tailstock

Drills

Ibarmai 30” Model 40-CA Drill, 1,623 RPM Spindle, 15”x15” T-Slot Table, Jacobs Chuck

Solberga 24” Model SE 2035M Drill, s/n 347780, Power Feed Spindle, 3,610 RPM Spindle, 18”x22” T-Slot Table, Jacobs Chuck

Boice Crane 24” Type CS30-S Drill, s/n 15304, 1,64 RPM Spindle, 12”X16” T-Slot Table, Jacobs Chuck

Yoshida 22” Model YUD-540 Drill, S/N 4112173, 1,525 RPM Spindle, 16” Round T-Slot Table, Jacobs Chuck

Delta 18” Drill, s/n 103-2608

Misc. Toolroom Machines

Diacro Rod Cutter

Heller 6” Abrasive Belt Grinder, s/n 630537

Chicago Model 912 Riveter, s/n 912-2508

Famco No. 6C Floor Standing Arbor Press with Adjustable Table

Dake Arbor Press on Stand

Famco No. 2 Arbor Press

Emerald 15” Disc Sander

Double End Opposed Drill with Drill-draulic Drill Head & Bendix Drill Head

Thermolyne Model F-A1740-1 Heat Treat Furnace, s/n 151865

Wilson Rockwell Hardness Tester

Welders

Miller 450 Amp Model Deltaweld 450 Welder, s/n JH161273 with 22A Wire Feed

Miller 250 Amp Model CP-250TS Welder, s/n T403554 with S-52A Wire Feed

3 – Miller 200 Amp Model CP-200 Welders, s/n JJ338808, s/n JK697486, s/n 72-617324 with S-52A Wire Feed

Truck

International Model 4300 DT466 25’ Box Body Truck, VIN: 1HTMMAAM56H251784 (New 2006),               6 Cylinder Turbo Diesel Engine, Tandem Axle, Automatic Transmission, Approx. 210,000 Miles On Odometer

Air Compressors and Dryer

Quincy 25 HP Model QGS-25 Screw Type Air Compressor, s/n CAI955254 (New 2016), with Infologic 2 Control

Quincy 30 HP Model QSB-30 Screw Type Air Compressor, s/n 90884J, 41,844 Hours on Meter

Zeks Refrigerated Air Dryer

Misc. Plant Equipment

Tennant Model M7100 Electric Riding Floor Scrubber, s/n 10307711, 512 Hours on Meter, with Charger

Raymond 6,000 LB. Model 112AT-FRE60L Electric Rider Pallet Jack, s/n 112-90-07689, 6180 Hours on Meter, with Charger

Assorted Self Dumping Scrap Hoppers

8’ Wide X 42” Deep X Approx 16’ High Adjustable Pallet Racks with Wire Decking

Bostitch Model FC95EC Carton Stapler

Aet Metal 2 Door Combination Safe on Wheels with Combination

International Harvester Freezer